Blower wheel cleaned blade by blade
The wheel is pulled where the cabinet allows and each blade is cleaned back to its actual profile, not just wiped on the visible face.
Free written estimates · On call 24/7
A dirty blower wheel quietly steals capacity for years. Cleaning it is the cheapest performance you can buy.
Licensed & insured · 127 five-star reviews
Fast response. No obligation.
The blower wheel moves every cubic foot of air your home conditions, and it is almost never inspected. Dust bonds to the leading edge of each blade until the blade profile changes shape, at which point the wheel is moving noticeably less air while drawing the same power. Because the loss happens over years, nobody notices the day it becomes a problem — the system simply runs longer for the same result. Evaporator coils suffer a related fate: the fins load with fine debris that slipped past a cheap filter, airflow across the coil drops, and the system starts to struggle exactly when Sacramento hits its hottest stretch. Cleaning both is far cheaper than the capacity you are losing to them.
If you are not satisfied with the result, we come back and make it right at no charge.
Benefits
The wheel is pulled where the cabinet allows and each blade is cleaned back to its actual profile, not just wiped on the visible face.
Coil-safe cleaner and controlled rinsing, working in the correct direction so debris comes out of the fins instead of being driven deeper.
The drain line and pan are cleared while access is open. A slow drain is what turns into an overflow and a ceiling stain in August.
Static pressure and airflow readings give you a real number for what the cleaning recovered.
The blower housing collects an oily dust film that a clean wheel will simply pick back up if it is left in place.
If what we find is a failing capacitor or a refrigerant issue rather than a cleaning problem, we tell you plainly and we do not sell you a cleaning that will not help.
Warning signs
Call (916) 260-2551 or request a quote online.
Process
The unit is isolated properly and the panels come off so the actual condition can be assessed rather than guessed at.
Static pressure and airflow are measured before anything is touched, so the improvement can be quantified.
The wheel is cleaned blade by blade and the housing is degreased so the clean wheel is not immediately reloaded.
Coil-safe cleaner is applied and rinsed in the correct direction, with the pan protected throughout.
The pan is cleaned and the condensate line is flushed and confirmed to be draining freely.
Panels go back with proper seals, the system is restarted and readings are taken again and reported to you.
Local
Questions
Yes, completely. Duct cleaning addresses the distribution system. This is the equipment itself — the blower and the coil — which is where most of the lost airflow actually hides.
It depends entirely on the starting condition. A badly loaded wheel and coil can be costing a substantial share of the system's rated airflow, which is why we measure before and after instead of quoting a percentage.
Sometimes, and sometimes not. If the cause is a refrigerant or electrical fault, cleaning will not fix it, and we will tell you that rather than take the job.
Every five to seven years for most homes, sooner if the system runs long seasons, if you have pets, or if inexpensive fibreglass filters have been used.
More
Whole-system cleaning under truck-mounted negative pressure, with camera photos of every trunk line before and after.
Learn more about Air Duct CleaningFull-length vent brushing from the drum connection to the exterior hood, with an airflow test before we leave.
Learn more about Dryer Vent CleaningEPA-registered sanitizer applied after cleaning, to neutralise odours at the source rather than mask them.
Learn more about Duct Sanitizing & DeodorizingAir Conn
1304 Lynette Wy
Sacramento, CA 95831
(916) 260-2551
info@airconnsacramento.com
| Monday | 12:00 AM - 11:59 PM |
|---|---|
| Tuesday | 12:00 AM - 11:59 PM |
| Wednesday | 12:00 AM - 11:59 PM |
| Thursday | 12:00 AM - 11:59 PM |
| Friday | 12:00 AM - 11:59 PM |
| Saturday | 12:00 AM - 11:59 PM |
| Sunday | 12:00 AM - 11:59 PM |
Fast response. No obligation.